Page 1 of 1

Code 13 and 16 after hondata install

Posted: Sat Jan 17, 2004 1:44 pm
by 5thgencivic
We are getting a code 13(Baro-Atmoshperic pressure sensor) and 16(injectors) after installing hondata.. The ECU is a P28. Hondata is a S200 with boost. Without the jumper, there are no codes at all..
Could I have a bad basemap? Can and should the baro be disabled if a new rom is burned? This isn't common with P28's is it? Thanks for any help you can give. We are hoping this can get resolved.


Posted: Sat Jan 17, 2004 6:31 pm
by 5thgencivic
I've done some researching and found my ECU doesn't have the sensor so both codes should be able to be disabled. Sorry for the wasted space :oops: Now I just need to find out if it will be ok to run a p28 basemap.

Posted: Tue Jan 20, 2004 9:08 am
by DevineCRX
Yes, a p28 base map will work fine.