Injector Cut in desaceleration

Hondata installation questions / answers / issues.
Locked
Dariusz
Posts: 94
Joined: Fri Nov 22, 2002 10:15 am
Location: Caracas - Venezuela

Injector Cut in desaceleration

Post by Dariusz » Wed Dec 01, 2004 6:27 pm

I'm using 750cc injectors and I like to know how to make that if I desacelerated the car (throttle in 0% open) to make that the injectors close.

Thanks in advance, I need this because I have very good A/F in 100% throtle but my fuel use in normal driving is very hight.

Dariusz

Dariusz
Posts: 94
Joined: Fri Nov 22, 2002 10:15 am
Location: Caracas - Venezuela

Post by Dariusz » Wed Dec 01, 2004 8:30 pm

Hondata wrote:Decel fuel cut off is built in. The injector is cut based on TPS and RPM, switching back on about 400 rpm above idle speed. If you are not getting decel injector cut then check your TPS adjustment - chances are the TPS is set slightly high.
What is the process to check the TPS adjustment? Is a option in the Rom Editor or is a mechanical work?
Thanks a lot for the ansver.

Dariusz

User avatar
Hondata
Site Admin
Posts: 8763
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Thu Dec 02, 2004 12:15 am

Decel fuel cut off is built in. The injector is cut based on TPS and RPM, switching back on about 400 rpm above idle speed. If you are not getting decel injector cut then check your TPS adjustment - chances are the TPS is set slightly high.
Hondata

Locked