Here's the issue I started having after over 2 years with my S200b.
All of a sudden. The check engine light came on a month ago. I turned the car off. and started it up again, and all was well untill today.
I started the car. drove it for 1 min and bam! the check engine light came on, and it went into limp mode. I turned it off, started it again. it was fine for another ~1 min. this happened 5-6 times in a row untill I got home. I'm assuming it's a connection? but where??? what causes limp mode to come on?
Limp mode after 1 min of diriving???
The car is throwing a code 14. The car runs fine when I'm giving it gas (greater than about 6% duty cycle). I'm also taken it to redline. It's just an idle thing... So, I don't think it's limp mode.
Last night I changed to Entire Throttle body. IAV valve, TPS sensor... everything to see if it was just the IAC. I started it, and same problem... Terable idle, almost stalls, code 14. I Re-set the ECU, the code went away for 10 sec or so, and back on, just like before.
The wierd thing is, if I turn off the car, the code gets erased... (Shows on the dataloger), then shortly after it pops back on.
I'm guessing it's a problem with the Hondata or ECU making something throw this code? Any idea's?
Last night I changed to Entire Throttle body. IAV valve, TPS sensor... everything to see if it was just the IAC. I started it, and same problem... Terable idle, almost stalls, code 14. I Re-set the ECU, the code went away for 10 sec or so, and back on, just like before.
The wierd thing is, if I turn off the car, the code gets erased... (Shows on the dataloger), then shortly after it pops back on.
I'm guessing it's a problem with the Hondata or ECU making something throw this code? Any idea's?