hi!
Currently I'm tuning a map provided by CorrPerformance Tuning, and run great!...this week I gonna change somethings like turbo manifold some pipes and heavy duty clamps, then to make a street tuning, I hope everything going to be fine.
Looking for H22A turbor Map at 8psi, and another questions
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
Of course, for me, this is the best map for starting point.
I just changed the fuel injectors size and tune a little bit at low RPM, I had no time to change the exhaust manifold to finish the tuneup.
Let me know what happend, how you feel the car.
saludos
I just changed the fuel injectors size and tune a little bit at low RPM, I had no time to change the exhaust manifold to finish the tuneup.
Let me know what happend, how you feel the car.
saludos
- Attachments
-
- H22a650ccinjectors.SKL
- (33.04 KiB) Downloaded 388 times
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama
-
- Posts: 38
- Joined: Sat Oct 28, 2006 7:27 pm
here's my 3rd gear datalog for u. it looks pretty solid but my inj duty cycle is extremely high when boost creeps to 11psi@95% eeeek. other than that it looks good. let me know ur thoughts pls thank u
- Attachments
-
- 3rd gear pull 3.s3d
- (163.9 KiB) Downloaded 349 times
-
- Posts: 16
- Joined: Mon Aug 03, 2009 8:49 am
hey!
Everything is working well!?...This week I'm tuning the car, some minutes every day, ignition maps need some changes, I make the changes based on another H22 at 10Psi dyno tuned and work very fine, after 5000rpm are too rich right now, I'm working on that.
saludos
Everything is working well!?...This week I'm tuning the car, some minutes every day, ignition maps need some changes, I make the changes based on another H22 at 10Psi dyno tuned and work very fine, after 5000rpm are too rich right now, I'm working on that.
saludos
Honda Club Panama
Corrperformance Tuning
Panama
Corrperformance Tuning
Panama