Looking for H22A turbor Map at 8psi, and another questions

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
gherrera06
Posts: 16
Joined: Mon Aug 03, 2009 8:49 am

Post by gherrera06 »

hi!

Currently I'm tuning a map provided by CorrPerformance Tuning, and run great!...this week I gonna change somethings like turbo manifold some pipes and heavy duty clamps, then to make a street tuning, I hope everything going to be fine.
Honda Club Panama
Corrperformance Tuning
Panama
snwbrdrx19
Posts: 38
Joined: Sat Oct 28, 2006 7:27 pm

Post by snwbrdrx19 »

mind posting the map? i would like to check it out
gherrera06
Posts: 16
Joined: Mon Aug 03, 2009 8:49 am

Post by gherrera06 »

Of course, for me, this is the best map for starting point.

I just changed the fuel injectors size and tune a little bit at low RPM, I had no time to change the exhaust manifold to finish the tuneup.

Let me know what happend, how you feel the car.

saludos
Attachments
H22a650ccinjectors.SKL
(33.04 KiB) Downloaded 388 times
Honda Club Panama
Corrperformance Tuning
Panama
snwbrdrx19
Posts: 38
Joined: Sat Oct 28, 2006 7:27 pm

Post by snwbrdrx19 »

here's my 3rd gear datalog for u. it looks pretty solid but my inj duty cycle is extremely high when boost creeps to 11psi@95% eeeek. other than that it looks good. let me know ur thoughts pls thank u
Attachments
3rd gear pull 3.s3d
(163.9 KiB) Downloaded 349 times
gherrera06
Posts: 16
Joined: Mon Aug 03, 2009 8:49 am

Post by gherrera06 »

hey!

Everything is working well!?...This week I'm tuning the car, some minutes every day, ignition maps need some changes, I make the changes based on another H22 at 10Psi dyno tuned and work very fine, after 5000rpm are too rich right now, I'm working on that.

saludos
Honda Club Panama
Corrperformance Tuning
Panama
Post Reply