Built B20 vtec need base map to get it to tuner

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter » Wed Mar 23, 2016 9:20 am

I'm new to hondata and need to get my car running good enuff to get it to the tuner any help would be appreciated
Specs b20 block bored to 85mm
Eagle rods Wisco 12.5 to 1 comp pistons
B16 head Blox tunner series p2 cams
Blox springs and titanium retainers arp head studs rod bolts and main studs
Stock intake mani
4 to 1 header
Stock injectors
Skunk 2 timing gears

smowkem_built
Posts: 7
Joined: Fri Oct 09, 2015 4:58 am

Re: Built B20 vtec need base map to get it to tuner

Post by smowkem_built » Fri Mar 25, 2016 6:22 am

try this out
Attachments
PRIME_R.skl
(41.45 KiB) Downloaded 513 times

Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Re: Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter » Fri Mar 25, 2016 11:23 am

Thanks for the reply I'll give it a try tonight and let you know how it goes

Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Re: Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter » Sat Mar 26, 2016 9:28 pm

Car runs a lot better really appreciate the help

smowkem_built
Posts: 7
Joined: Fri Oct 09, 2015 4:58 am

Re: Built B20 vtec need base map to get it to tuner

Post by smowkem_built » Fri Apr 08, 2016 1:25 am

your welcome... its a tune

Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Re: Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter » Thu May 26, 2016 1:15 pm

Car runs lean between 50 and 60 mph in 5 how can I fix that ?

Post Reply