Could someone help?

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
civicrocker
Posts: 5
Joined: Thu Jun 04, 2015 9:55 am

Could someone help?

Post by civicrocker » Tue Aug 02, 2016 6:46 am

i just built an lsvtec and am in the process of installing it. but i have yet to find a calibration that has been confirmed to work. i just need a basic tune so i can break in the motor. or is it possible to just use one for a b18c1?

my engine is a b18a block with pr3 pistions and pr3 head. my compression is around 11.6/1

please help!

civicrocker
Posts: 5
Joined: Thu Jun 04, 2015 9:55 am

Re: Could someone help?

Post by civicrocker » Fri Aug 05, 2016 12:48 pm

BUMP!

No response even fron spunkster?
i have searched the vault and could not find any setups close to mine

User avatar
Spunkster
Site Admin
Posts: 18080
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Could someone help?

Post by Spunkster » Fri Aug 05, 2016 2:27 pm

Have you tried the ls/vtec base calibration built into the software in the new calibration window?

civicrocker
Posts: 5
Joined: Thu Jun 04, 2015 9:55 am

Re: Could someone help?

Post by civicrocker » Sat Aug 06, 2016 7:31 am

Is there one? The closest one i saw was the itb.skl and it says its setup for itb's and 440 injectors. I'm only running stock 240 injectors and am waiting for RC310's in the mail. I will recheck when I get home though. If you say there is one then there must be.

P.S. thanks for replying

SM0K3YMOUNT41N
Posts: 4
Joined: Thu Aug 11, 2016 6:47 am

Re: Could someone help?

Post by SM0K3YMOUNT41N » Wed Aug 24, 2016 8:35 pm

What calibration did you end up using and it may seem dumb. But after I put the new injector size to 440 how do I save that to the ecu? As in steps for where the key needs to be. Then what to select on the program?

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Could someone help?

Post by Zperformance » Tue Sep 06, 2016 5:26 pm

Should be startup. Adjust AFR to spec. Let me know how it do, i will try to help as much as i can.






*Use at your own risk I will not be responsible for any problem or damage to your engine*
Attachments
basemap. Startup for LSV.skl
*Use at your own risk*
(45.91 KiB) Downloaded 60 times

Post Reply