HELP H22 BASE MAP NEEDS LOOKING AT

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Az786
Posts: 15
Joined: Thu Sep 08, 2016 12:50 pm

HELP H22 BASE MAP NEEDS LOOKING AT

Post by Az786 » Tue Oct 18, 2016 9:39 am

HI, I HAVE A H22 WITH EURO R INTAKE THROTTLE AND 310 INJECTORS, TRI Y MANIFOLD 2.5 STRAIGHT TO THR REAR. CAN SOMEBODY LOOK AT THE MAP AS IT IDLES FINE BUT HAS NO TORQUE TO VTEC AND WHEN V TEC INGAGES IT PULLS VERY HARD.

DATALOG AND CALIBRATION ATTACHED

THIS IS MY FIRST ATTEMPT TO RECORD A DATALOG AND POST IT SO IF THERE IS SOMETHING I HAVENT DONE LET ME KNOW

THANKS
Attachments
datalog.s3d
(239.86 KiB) Downloaded 71 times
h22 latest 310cc 5k vtec.skl
(41.28 KiB) Downloaded 119 times

User avatar
Spunkster
Site Admin
Posts: 18073
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: HELP H22 BASE MAP NEEDS LOOKING AT

Post by Spunkster » Tue Oct 18, 2016 10:35 am

Since this is just a base map, it will need to be properly tuned on the dyno to get the maximum potential out of it.

Az786
Posts: 15
Joined: Thu Sep 08, 2016 12:50 pm

Re: HELP H22 BASE MAP NEEDS LOOKING AT

Post by Az786 » Tue Oct 18, 2016 11:03 am

Okay, the problem I have is the h22 base maps on the manager will not run on my setup as I have a Euro r intake injectors setup, can you adjust the h22 base map to suit my setup UNTILL mapping session?

Post Reply