Full build B16A calibration needed

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Sneaky_84
Posts: 7
Joined: Wed Oct 19, 2016 5:48 pm

Full build B16A calibration needed

Post by Sneaky_84 »

Hi guys i going to need a calibration for my full build B16a.
-B16A block stock sleeve solid deck (CSS)
-stock crank
-Skunk2 Rods
-Arias 81.5mm pistons 10,5:1CR
-ARP studs
-Full skunk2 valvetrain std size
-Skunk2 tuner stage 2 camshaft (not degreed yet)
-Edelbrock intake + 70mm TB
-Speedfactory map sensor
-RC310cc injectors
-Walbro 255lph pump
-BWR topmount manifold
-Tail 38mm wastegate
-Tial blowoff
-Turbonetics T61 ballbearing turbo
-Stock ignition system.
-Stock O2 sensor
-ITR LSD tranny

i just need a calibration for the breake in period or for startup.
the stock parts will be replaced soon.

thanks,
J.Donato
Post Reply