B18A whit p30 pistons

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Henssen
Posts: 3
Joined: Tue Feb 21, 2017 3:43 pm

B18A whit p30 pistons

Post by Henssen » Sat Feb 25, 2017 9:23 am

Hello,

i need help, please need base map for block b18a whit pistons p30, head Pr4 Non-Vtec, Intake k n, hondata S300 V3.
MLS Cometic gasket.

thanks,

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: B18A whit p30 pistons

Post by Zperformance » Wed Mar 15, 2017 6:09 pm

Have a wideband install and adjust afr to spec. Timing is retarded a bit to compensated for the higher compression. Let me know how it do and if there is any problem.
Attachments
Ls(B16 piston).skl
*i will not be reliable for any damage*
(43.56 KiB) Downloaded 78 times

Henssen
Posts: 3
Joined: Tue Feb 21, 2017 3:43 pm

Re: B18A whit p30 pistons

Post by Henssen » Sun Mar 19, 2017 10:31 am

Zperformance wrote:Have a wideband install and adjust afr to spec. Timing is retarded a bit to compensated for the higher compression. Let me know how it do and if there is any problem.
Thanks recent install brian cower bc0022 and bc0020 change the base map?

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: B18A whit p30 pistons

Post by Zperformance » Sun Mar 19, 2017 5:41 pm

timing is a bit conservitive just add fuel and should be a okay basemap.

Post Reply