B18C1 with 84mm bore and 4 piston head

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Trey6904
Posts: 1
Joined: Mon Sep 04, 2017 2:36 pm

B18C1 with 84mm bore and 4 piston head

Post by Trey6904 » Mon Sep 04, 2017 2:43 pm

Need a basemap for a B18c1 with a 84mm bore, port and polished 4 piston head ITR cams, 1300cc DeatschWerk injectors, 4bar hondata map, Golden eagle intake manifold, 70mm omni TB, The turbo setup specs are not needed since i need it just to run and idle P28 ecu with hondata s300v3. Will have cop this week but can run the basemap on dizzy if need be. Thanks!

Post Reply