B18c1 550cc turbonetics turbo w/g basemap help

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
jediprophet
Posts: 1
Joined: Thu Aug 24, 2017 7:16 am

B18c1 550cc turbonetics turbo w/g basemap help

Post by jediprophet »

Looking for help with a basemap, i have a b18c1 professional products intake manifold, 68mm throttle body, 550cc bosch injectors, 255lph deitchworks fuel pump, log mani, turbonetics t3/t4 turbo (specs unknown) turbonetics evolution wastegate at 10psi, currently with no 02 sensors other than wideband that is not wored into the ecu at this time. 3 inch fender exit exhaust is planned but currently have 3 inch dp and exhaust (kteller with magniflow muffler) any help would be greatly appreciated.

Thanks jedi-prophet
Post Reply