B18 stock block head/rod bolts 1200cc precision injectors

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Noboost
Posts: 1
Joined: Fri Dec 01, 2017 9:21 am

B18 stock block head/rod bolts 1200cc precision injectors

Post by Noboost » Fri Dec 01, 2017 9:35 am

B18 stock block head/rod bolts, 1200cc precision, plx wide band ,turbonetics 60trim , walbro 255 on e85 does any one have a map that I could possibly use to get running decent with lil modifications of course thank you in advance

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: B18 stock block head/rod bolts 1200cc precision injectors

Post by Zperformance » Wed Jan 24, 2018 6:53 pm

I assumed you by just B18 you meant an non-v motor so i used an Ls base and worked on a little basemap for you. LMK how it do for you. I advice to use a wideband and check your distributor timing to make sure your timing at the crank is 16*.
Attachments
B18 1200cc e85.skl
*I am not responsible for anything that occur using this basemap*
(47.4 KiB) Downloaded 71 times

Post Reply