Need Basemap for turbo GSR please!!

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Coltonmiller22
Posts: 4
Joined: Mon May 28, 2018 2:37 pm

Need Basemap for turbo GSR please!!

Post by Coltonmiller22 » Sun Jun 10, 2018 9:35 am

I’ve tried all the closest turbo gsr maps in the vault none make my car start! Please help I’m new to hondata not really familiar with what I’m doing. Any help would be greatly appreciated!!
Info; 99 integra gsr swap in 94 Honda Civic Cx.
Turbocharged to4e set up eBay 57 trim.
Dsm 450 black top injectors
Skunk2 pro series intake 70mm tb
Stock Map, block, head.
Headstuds
P28 hondata sc300 v3
Please someone help. It’s getting spark, fuel, and cranking just not enough to turn over it seems like. It starts on starter fluid.
Things checked;
Compression-good
Timing-in time
Fuel- good all injectors pulse.
Spark- good, all cylinders get spark, plugs brand new gapped to .22
Dizzy- good brand new coil and icm
Grounds- all grounds are perfect freshly replaced. Ground on thermostat housing is also great and freshly cleaned.
All fuses have been checked and no burns.
Main relay is also great.
Fuel pump is great and primes healthy.
Cel is on doesn’t blink. (Known for ecu but the ecu is perfectly fine I have seen zero burns or issues within it)

Someone please help I’ve tried to list everything I can.

User avatar
Spunkster
Site Admin
Posts: 18054
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Need Basemap for turbo GSR please!!

Post by Spunkster » Mon Jun 11, 2018 9:28 am

Are you using a resistor box with those injectors?

Coltonmiller22
Posts: 4
Joined: Mon May 28, 2018 2:37 pm

Re: Need Basemap for turbo GSR please!!

Post by Coltonmiller22 » Mon Jun 11, 2018 3:40 pm

Spunkster wrote:
Mon Jun 11, 2018 9:28 am
Are you using a resistor box with those injectors?
Yes sir!

User avatar
Spunkster
Site Admin
Posts: 18054
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Need Basemap for turbo GSR please!!

Post by Spunkster » Tue Jun 12, 2018 11:01 am

Who socketed the ECU? HAs J12 been removed?

Coltonmiller22
Posts: 4
Joined: Mon May 28, 2018 2:37 pm

Re: Need Basemap for turbo GSR please!!

Post by Coltonmiller22 » Tue Jun 12, 2018 2:28 pm

Spunkster wrote:
Tue Jun 12, 2018 11:01 am
Who socketed the ECU? HAs J12 been removed?
Had a guy who’s been socketing ecu’s for awhile do it. J12 has been remove I have verified it.

User avatar
Spunkster
Site Admin
Posts: 18054
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Need Basemap for turbo GSR please!!

Post by Spunkster » Tue Jun 12, 2018 4:01 pm

Did he test it after socketing it with the s300?

Coltonmiller22
Posts: 4
Joined: Mon May 28, 2018 2:37 pm

Re: Need Basemap for turbo GSR please!!

Post by Coltonmiller22 » Tue Jun 12, 2018 7:26 pm

Spunkster wrote:
Tue Jun 12, 2018 4:01 pm
Did he test it after socketing it with the s300?
Yes he did.

2000ebpsi
Posts: 1
Joined: Wed Jun 13, 2018 7:35 am

Re: Need Basemap for turbo GSR please!!

Post by 2000ebpsi » Wed Jun 13, 2018 7:41 am

Here is my base map for a turbo gsr im running precision 1000cc injectors and speed factory 4 bar map sensor so you may have to change those if your car doesnt start or you dont have those parts
Attachments
B18C Turbo - Base Map.skl
(42.36 KiB) Downloaded 180 times

Post Reply