D16Y8 base timing question

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Turbod16chris
Posts: 3
Joined: Sun Jun 10, 2018 7:35 pm

D16Y8 base timing question

Post by Turbod16chris » Sat Jun 30, 2018 11:58 am

When setting the base timing on a D16Y8 with a p28 and s300 this is what I did ... I set the base timing at 16 deg then I selected the entire ignition map and took out 4 deg across the entire map. My question is will this work for my application thanks

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: D16Y8 base timing question

Post by Zperformance » Sun Jul 01, 2018 8:17 pm

set base timing at 16. Adjust fuel and slowly add those timing back and see how the car respond.

Turbod16chris
Posts: 3
Joined: Sun Jun 10, 2018 7:35 pm

Re: D16Y8 base timing question

Post by Turbod16chris » Tue Jul 10, 2018 6:58 pm

ok thanks for your help

Post Reply