Please help.

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
b16Monty
Posts: 1
Joined: Sun May 19, 2019 10:25 am

Please help.

Post by b16Monty »

I just recently finished soldering my s300 into my p06 ecu and when I plug the ecu into my car and key on the ignition I get two green lights to come on, But when I plug my ecu into my smanager I get one green light and one fast blinking red light and it will not let me load a calibration. (I registered my hondata board). ( I also cut j12). please help. thank you
Green light (d4)
Red light (d2)
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Please help.

Post by Spunkster »

What is he serial number that is on the s300 board inside the ECU?

From Help, About, what is the version of software you are using?
Post Reply