I want a ready calibration for B16 head B20 block

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
bod18ahm@gmail.com
Posts: 3
Joined: Thu Mar 19, 2020 8:55 am

I want a ready calibration for B16 head B20 block

Post by bod18ahm@gmail.com »

*manifold: skink2 stage2 with cold intake.
*Injectors: 240.
*Head B16.
*Cams skink2 stage2.
*Cams gears AEM.
*Double spring valves.
*Block B20 stock.
*Flywheel and Clutch Competition stage4.
*Gear box manual GSR 5 speeds.
*CPU Hondata S300v2.

+These all parts on my engine please I want a ready calibration
EWY
Posts: 1
Joined: Thu Nov 19, 2015 10:06 pm

Re: I want a ready calibration for B16 head B20 block

Post by EWY »

I can help you build one if you have a Wideband
payam_fox
Posts: 19
Joined: Sat Jun 15, 2019 4:34 pm

Re: I want a ready calibration for B16 head B20 block

Post by payam_fox »

i have b18 with b16 head right now if you want you can try mine , is yours na or turbo ? i have both , you just have to change your injector size
Attachments
CURRENT LSVTEC.skl
this is lsvtec turbo same setup but with turbo (tuned for 11 psi )
(54.33 KiB) Downloaded 133 times
LSvtec base dont save on this.skl
this is for lsvtec N/A with aftermarket everything(cams intake forged internals, headers )
(50.39 KiB) Downloaded 150 times
Post Reply