Looking for F22B SOHC VTEC stock basemap

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
aduncan1511
Posts: 3
Joined: Sat Jul 17, 2021 11:39 am

Looking for F22B SOHC VTEC stock basemap

Post by aduncan1511 »

I need a stock basemap for a F22B SOHC VTEC 2.2L ENGINE. All I have installed is a cold air intake and 4-Dr Stainless Racing Manifold Header Exhaust. Any help or advice is appreciated! Also the base map on the ECU is for a H22A. Could I work off that or or should I start fresh?
lanelltaber
Posts: 1
Joined: Tue Jul 27, 2021 9:27 pm
Contact:

Re: Looking for F22B SOHC VTEC stock basemap

Post by lanelltaber »

Sorry if I'm being annoying but could I please get an answer?
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Looking for F22B SOHC VTEC stock basemap

Post by CalibratEd »

aduncan1511 wrote: Sun Jul 18, 2021 12:19 pm I need a stock basemap for a F22B SOHC VTEC 2.2L ENGINE. All I have installed is a cold air intake and 4-Dr Stainless Racing Manifold Header Exhaust. Any help or advice is appreciated! Also the base map on the ECU is for a H22A. Could I work off that or or should I start fresh?
Any base map that you use will need modification. I would start with the H22 base map and then dial it in but adusting the injectors and dialing in the fuel. Hondata does not provide a base map for your engine. Any that you will find lingering on multiple forums is a modified P72 base map or modified H22 basemap.

I can help dial in the tune but you would need to have a wideband.

-Ed
Post Reply