B18Csupercharger 440 injectors

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

B18Csupercharger 440 injectors

Post by Spunkster »

B18Csupercharger 440 injectors
Attachments
B18Csupercharger.skl
(16.58 KiB) Downloaded 2005 times
Last edited by Spunkster on Wed Apr 29, 2009 12:43 pm, edited 2 times in total.
HondAcura
Posts: 6
Joined: Sat Jul 29, 2006 6:42 pm
Location: -Connecticut-

Thank you

Post by HondAcura »

Thanks
ramirez8583
Posts: 4
Joined: Mon Sep 18, 2006 12:15 am
Location: bakersfield, CA

Post by ramirez8583 »

will this work for a t3t4 turbo with 525 injectors???
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

ramirez8583 wrote:will this work for a t3t4 turbo with 525 injectors???
No
C_Rock77
Posts: 13
Joined: Mon Feb 04, 2008 9:01 pm

Post by C_Rock77 »

Is this the same calibration as the one that comes with the S300, itself?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

yes
MyLilCivic
Posts: 2
Joined: Tue Oct 28, 2008 9:36 am

few questions

Post by MyLilCivic »

Just to make sure.

This is the map for the J-spec ITR?

I noticed that you use the RC 440 injectors will i be ok if im using the precision 440 injectors i am also using a 190 fuel pump. What do i set the fuel pressure to on the regulator and also timing?

and if i need to use a different map can you please send the link were i need to go.

I just want to have this to start the car and be abler to drive it safely before the tune.

PS this is on a MVM stepper pulley as well 9 to 10psi boost
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

It is for a B18C5. Stock fuel pressure regulator. Walbro 255 pump. Stock ignition timing.
Locked