Page 1 of 1


Posted: Sun Jan 11, 2009 4:04 am
by lsvtecem1
I have a question. How do can I convert a .bin file to .skl? I have an Ls/Vtec .bin map but need it to be .skl for Smanager. Thanks in advance.

Posted: Mon Jan 12, 2009 10:34 am
by Spunkster
In Smanager, go to File, open, make sure you have the file type set to all and open the bin you want to use.

Posted: Wed Jan 14, 2009 12:55 am
by lsvtecem1
I have tried that but when it opens the .bin file and I go to the Tables tab, the graph is all screwed up and all the numbers are too, even the rev limiter fuel compen. and so on. :cry:

Posted: Wed Jan 14, 2009 8:59 am
by Hondata
Check the size of the bin file - if it is not 32768 bytes, then it is another file format renamed to .bin.

Posted: Wed Jan 14, 2009 11:12 am
by lsvtecem1
Oh okay, its 48000 bytes. well I have another question. How do I go from 1.6 to 1.8 liter when using a P30 Basemap?

Posted: Wed Jan 14, 2009 11:27 am
by Spunkster
Under Parameters in the Fuel Trim tab, click on Calc.

Posted: Thu Jan 15, 2009 12:27 am
by lsvtecem1
Will try it out when i get a chance, but thank you for helping me. :D