My Driving Template

Place your display templates here with a screen shot of it for previewing.
Post Reply

How do you rate this display

Perfect
0
No votes
Useful
6
50%
Clean
4
33%
Average
1
8%
Needs work
1
8%
 
Total votes: 12

WaZe_One87
Posts: 26
Joined: Sun Jul 01, 2012 2:37 pm

My Driving Template

Post by WaZe_One87 » Sat Mar 16, 2013 9:21 am

Here is my display that I made for quick and easy info. I use it for driving and while reviewing datalogs. I spent a good amount of time tweaking the Air/Fuel bar at the bottom so that it will show Red for Over Rich and Over Lean, Yellow for Ideal LOAD richness and cautionairy lean, and Green for cruising lambda levels. Also the bar will go dark green when no fuel is added and you go full lean such as when you go off throttle during decelleration. The RPM, Air/Fuel, Ignition degrees, Coolant temp, and Intake temp are all visible with the tables over the rest of the gauges. As well as the Air/Fuel bar. All will also change red at propper levels for warning you. (such as if your over rich during a pull, pass redline, overheat, ect.) As just a added benifate of it peeking out under the tables is when you click datalog to start recording, the rest of the display shows over it. (not my doing but find it convenient) Also see how i have my datalog graphs overlay the other half of my screen so i can see everything more clearly as i scroll through them. Here are several examples of each instance to show the Air/Fuel bar functionality. Hope you guys enjoy.

Image

NOTE: was made for b16 with a stock redline of 8200

Image
Cruising

Image
During Pull

Image
Closed Throttle

Image
Over Rich

Image
Slightly Lean

Image
Over Lean

Image
With the tables overlaping the rest of the gauges

Also note that above layout is on a 17" laptop screen, you may need to mess with your window sizes to get it to look the same.

Feel free to leave me feedback on how you like or hate it lol. I think it has high functionality for minimal space personally.
Attachments
Full Driving Display.display
(11.8 KiB) Downloaded 704 times
B16a2 Darton MID sleeves,JE Pistons 10:1,Eagle Rods,ACL Race bearings,Fully Ballanced
Built Head,3 angle valve Job,Supertech Dual ValveSprings/Ti Retainers,Brian Crower Stg2 Turbo Cams
Competition Clutch Super Single clutch
EMUSA T3/T04E .50ar/.63ar Turbo

mitsuman
Posts: 12
Joined: Thu Aug 02, 2012 12:25 pm

Re: My Driving Template

Post by mitsuman » Thu May 22, 2014 3:00 pm

Good stuff man. Thanks!

h10ndr
Posts: 10
Joined: Sun Mar 15, 2009 11:46 am
Location: UK

Re: My Driving Template

Post by h10ndr » Wed Aug 23, 2017 3:41 am

I'm being thick now .... how do you import the downloaded .display files? I can only see how to import .ini files in graph templates??? Nothing for display import?
Tim
http://www.s2kuk.com
http://www.ludegeneration.co.uk

h10ndr
Posts: 10
Joined: Sun Mar 15, 2009 11:46 am
Location: UK

Re: My Driving Template

Post by h10ndr » Wed Aug 23, 2017 3:50 am

Found it!! I was being thick. I was looking for an import button on the display window settings, not off the main menu drr
Tim
http://www.s2kuk.com
http://www.ludegeneration.co.uk

Post Reply