Question about calibrations...

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
Tincho_SI
Posts: 3
Joined: Thu Jun 17, 2010 7:39 pm

Question about calibrations...

Post by Tincho_SI »

Hi... i`m new... I have a 2010 civic Si with aem short ram, thermal space-bar, stock header whit the rest in 2 1/2" and hondata... I use this calibration: aem sri, rece header, highflow cat, stock catback... My doubt is the following one: Is it possible to change the advance of the ignition and the advance of the camshaft? In withc tables I have to change the values? Thanks for your help...

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

The FlashPro is a fully tunable system. I would recommend reading some of the traning material at

http://www.hondata.com/flashpro_civicsi_training.html and
http://www.hondata.com/help/flashpro/index.html

Tincho_SI
Posts: 3
Joined: Thu Jun 17, 2010 7:39 pm

Post by Tincho_SI »

Thanks for your answer, now, with the stock camshaft and stock internals is it a suitable to tune the ignition and the camshaft?

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

I don't understand your question.

Tincho_SI
Posts: 3
Joined: Thu Jun 17, 2010 7:39 pm

Post by Tincho_SI »

should modify the ignition and cams with the hondata???

Post Reply