Need a 2012 CRZ MT Calibration

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
nam9482
Posts: 3
Joined: Tue Nov 06, 2012 8:53 pm

Need a 2012 CRZ MT Calibration

Post by nam9482 » Thu Nov 08, 2012 12:28 am

It seems I cannot load the base tune calibration from the 2011. There seems to be no calibrations available for my year. Why cannot create a new calibration from my factory tune? All I have as of right now is a HKS intake. I have a Golden Eagle manifold RDX injectors, HKS exhaust, and turbo going in sometime soon. I am new to Hondata. I am a AEM guy. I need a base tune apparently to get going. I've searched for a tune here with no luck. Any info would be appreciated.

User avatar
Hondata
Site Admin
Posts: 8813
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Need a 2012 CRZ MT Calibration

Post by Hondata » Thu Nov 08, 2012 7:57 am

There is a calibration for the 2010/2011 & 2012 Euro CRZ. If it does not show up under 'New Calibration', make sure that you select the CRZ when installing FlashProManager.
Hondata

nam9482
Posts: 3
Joined: Tue Nov 06, 2012 8:53 pm

Re: Need a 2012 CRZ MT Calibration

Post by nam9482 » Sun Nov 11, 2012 9:23 pm

Hondata wrote:There is a calibration for the 2010/2011 & 2012 Euro CRZ. If it does not show up under 'New Calibration', make sure that you select the CRZ when installing FlashProManager.

Yeah I did see calibrations for those, I used the 2011 US version and made my adjustments. It will not allow me to send a 2011 US MT to a US 2012 MT FlashPro.

Post Reply