Please Take a look at My datalog K20/k24 8th Civic Si coupe

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

typer86
Posts: 312
Joined: Sun Oct 28, 2012 3:17 pm

Re: Please Take a look at My datalog K20/k24 8th Civic Si coupe

Post by typer86 » Tue Aug 04, 2015 12:26 am

Hi Roland,

Please note!!!
Drive carefully! I will not guarantee If your engine will be damaged after driving with the new cal.

I'm adding more ignition and advance the little bit the knock sensitivity. More details is documented in the notes of the attached cal.
May the ignition must be advanced more to eliminate the knocking. Please refuel only high octane gas!

I highly recommend to contact a tuner for fresh new calibration for your engine. (For example contact VitViper.)
You have spent a lot of money for the engine parts but the cal for this engine is really cr*p. :-(

Regards
Attachments
Roland_31-07-2015_#3.fpcal
(17.76 KiB) Downloaded 114 times

poitrasr
Posts: 11
Joined: Wed Jul 08, 2015 6:31 am

Re: Please Take a look at My datalog K20/k24 8th Civic Si coupe

Post by poitrasr » Sat Oct 08, 2016 3:52 pm

Hey Typer86 how are you today?

I change my supertech valves and spring and retainer for Skunk2 Ultra series Flat and Skunk2 dual spring and skunk2 titanium retainer and oil for Amsoil 15w50 and plugs Iridium 2 step colder in my 8th gen K20/K24 and need your help since that day my car dont drive good at all ! Can you help me for my tune with my last datalog done ?

Thanks sooooo much man

Post Reply