Hondata Vault - get old calibration

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
ridzuansaidi7767
Posts: 12
Joined: Fri Feb 03, 2017 6:19 am

Hondata Vault - get old calibration

Post by ridzuansaidi7767 » Fri Feb 03, 2017 10:04 am

My FP is register to my tuner. My question is can i change the owner information to own name? Means just update the info. i also would like to ask is there any way to get back my old calibration? coz the FPmanager update the version so i cant open my previous calibration and need to make new calibration to start back my engine. I love my last calibration and i dont want to waste time for tuning again. thanks you

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata Vault - get old calibration

Post by Spunkster » Fri Feb 03, 2017 10:30 am

As long as it is not password protected you should be able to register it in your name. If you cannot then you will need to contact the person that registered it to have them help you register it in your own name and remove the password. If you do not have the calibration saved to the laptop and cannot download it form the FlashPro then you will need to contact the tuner for the calibration as well.

ridzuansaidi7767
Posts: 12
Joined: Fri Feb 03, 2017 6:19 am

Re: Hondata Vault - get old calibration

Post by ridzuansaidi7767 » Sun Feb 05, 2017 12:33 pm

Spunkster wrote:As long as it is not password protected you should be able to register it in your name. If you cannot then you will need to contact the person that registered it to have them help you register it in your own name and remove the password. If you do not have the calibration saved to the laptop and cannot download it form the FlashPro then you will need to contact the tuner for the calibration as well.
Ok thanks.

Post Reply