Convert tables Fuel MAP a AFM

[tiozes]

Hi,
I have an FN2 with turbo with cal RACE and I want to put AFM calibration using IAT sensor and to deactivate AFM, how do I convert the fuel tables for a correct operation?
regards

[R-12914]

You must make a fully retune!

[mladjan]

Ok, it should be retuned, but can someone post some guidance which settings in the map itself are different? What we should be aware when doing this conversion?
I also have rotrex supercharged fn2 with race calibration, and would like to create one more map which is Hybrid.
If I copy/paste tables, will car be drivable for tuning, or safe at least?

[typer86]

Yes and yes. But use the vtc profile and ignition what I sent to you ;)
Lock cams 50 and Rev it at first to 5000 or 6000 RPM and watch the lambda is 0.80...
Adjust the fuel and repeat this for all other cam angles

[tiozes]

To work the AFM sensor has to be installed? Or can I remove it and have only the MAP sensor?

[Spunkster]

You can disable it, there really is no need to completely remove it. IT contains the IAT sensor so if you do remove it, you must wire in a proper IAT sensor as well.

[typer86]

You can disable it, there really is no need to completely remove it. IT contains the AIT sensor so if you do remove it, you must wire in a proper IAT sensor as well.

Yes IAT relocation is recommended...