08 S2000 Toda Map

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

08 S2000 Toda Map

Post by hatalu » Wed Apr 12, 2017 7:44 pm

Dear Hondata,
I bought Hondata few years ago and haven't not tune my car until now. My car is 08 S2000 CR with Comptech icebox intake, Toda Header, 70mm TP, FD4.77 and 60mm inner Toda Power Dolphin dual exhaust. I wonder it is safe to run Toda map on it? even though calibration only indicate Toda Header only, is there better Calibration map I can use? and what should my VTEC windows needs to set at? 4100-6700 or I should start VTEC at 4k? please help I'm pretty new here.

User avatar
Spunkster
Site Admin
Posts: 18008
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 08 S2000 Toda Map

Post by Spunkster » Thu Apr 13, 2017 9:39 am

All you can do is try it and see how it runs and make sure that there is no knock and that the AF ratio is safe.

hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

Re: 08 S2000 Toda Map

Post by hatalu » Thu Apr 13, 2017 9:02 pm

ok, I will datalog it and post to see if there any knock on it.

hatalu
Posts: 5
Joined: Wed Apr 12, 2017 7:36 pm

Re: 08 S2000 Toda Map

Post by hatalu » Fri Apr 14, 2017 5:38 pm

I did the datalog today, looks like I have 2 K-Counts, from K-Count 2 and 3. Is that ok? what I need to do? can someone help me out? Log attached.
Attachments
datalog0006.fpdl
(2.74 MiB) Downloaded 81 times

Post Reply