Replicated MT. 9psi map for Cvt. But...

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
firelu21
Posts: 8
Joined: Tue May 02, 2017 7:54 pm

Replicated MT. 9psi map for Cvt. But...

Post by firelu21 » Sat May 20, 2017 2:24 pm

Anyone know if this is a good ideal? I took all the numbers from the mt 1.5t +9psi map. And put all the same numbers in calibration and saved . But I'm not sure if it's something that can just be done, or if there's more to it.

User avatar
Spunkster
Site Admin
Posts: 18007
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Replicated MT. 9psi map for Cvt. But...

Post by Spunkster » Mon May 22, 2017 9:21 am

No, it cannot be this way, there is more to it. Even if this were possible, it is not recommended, as it would damage the CVT.

firelu21
Posts: 8
Joined: Tue May 02, 2017 7:54 pm

Re: Replicated MT. 9psi map for Cvt. But...

Post by firelu21 » Mon May 22, 2017 8:07 pm

here is a few short burst runs and some driving, i wish i could learn how to read these logs. i don't know whats bad or not
Attachments
9psi.fpdl
(387.61 KiB) Downloaded 55 times

Post Reply