Calibration on flashpro but from older version

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
red8th
Posts: 1
Joined: Mon Aug 07, 2017 6:14 am

Calibration on flashpro but from older version

Post by red8th » Mon Aug 07, 2017 6:20 am

First issue,I have the calibration loaded on my flashpro but when i open FPmanager it says they're from an older version and it wont let me download onto the manager.

Also I accidentally pressed program button after i initially pressed it so it started flashing and it cancelled the flash, now it says last upload failed but when i go to flash it again it starts to for a few seconds then the light turns off.
Any help is appreciated since my car wont start now.

User avatar
Hondata
Site Admin
Posts: 8776
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Calibration on flashpro but from older version

Post by Hondata » Mon Aug 07, 2017 8:40 am

What version FlashProManager do you have?

It sounds like the vehicle will not start because you stopped the reflash part way though. Open a calibration and upload to the vehicle again (any calibration), and it will fix this.
Hondata

Post Reply