Hi All
At the moment I'm running FD2R base map from the flashpro calibration and my car is running fine.
Mod-list:
RBC intake, Injen CAI
Headers, 2.5" straight exhaust
Injectors OEM 310
Upgrades:
550cc grams injectors
J35 tb with k-Tuned spacer
My question is can I use the autotuning feature in Flashpro to fine tune the map on its own or will I still be running rich?
Thanks for your input
Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer
Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer
Thanks & Regards
------------------------------
Ecronic
------------------------------
Ecronic
Re: Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer
Your best bet is to start by adjusting the Injector Size in the calibration. Here's the help page on how this is done:
https://www.hondata.com/help/flashpro/i ... meters.htm
For the throttle body you would adjust the Throttle vs Flow parameters.
https://www.hondata.com/help/flashpro/i ... meters.htm
For the throttle body you would adjust the Throttle vs Flow parameters.
/ruddyrid
Re: Autotuning - Upgraded injectors to 550cc, J35 throttle body with spacer
Thanks for the reply. Got it all worked out.
Thanks & Regards
------------------------------
Ecronic
------------------------------
Ecronic