2018 Accord 2.0 Sport ==> Stage 1-2 question

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
Posts: 2
Joined: Mon Dec 31, 2018 1:39 pm

2018 Accord 2.0 Sport ==> Stage 1-2 question

Post by AndyEckel »

Hi -
I’m new to this forum and a have a stock 2018 Honda Accord 2.0 Sport with the 10 spd automatic. I’m keen to purchase the FlashPro and dial up the performance a bit with a “Stage 1” and/or Stage 2 calibration but have been unable to determine the answer to this particular question.

Can the FlashPro calibrate the ECU such that it is programmed as follows:

1) Econ Mode (leave as is - never used anyway)

2) Normal Mode (I.e., nether Econ or Sport specified) = STAGE 1 map

3) Sport Mode = STAGE 2 map

I spend most of my everyday driving in Normal Mode and my logic is that Stage 1 makes perfect sense. A little more power than stock, but safe and reliable. When I want an extra boost, select Sport Mode and Stage 2 kicks in.

IS THIS EVEN POSSIBLE? Appreciate any insight here. Thanks!

User avatar
Site Admin
Posts: 9272
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA

Re: 2018 Accord 2.0 Sport ==> Stage 1-2 question

Post by Hondata »

The short answer is no, since most of the tables we change as independent of mode. You'd have to run either stage 1 or stage 2.

Posts: 2
Joined: Thu May 07, 2020 12:11 am

Re: 2018 Accord 2.0 Sport ==> Stage 1-2 question

Post by amurciano »

Is this still the case, any recent updates to have this feature?

Post Reply