Recommendation map for a completely stock 2008 Civic Si?

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
SSJ_sedan
Posts: 1
Joined: Sat May 04, 2019 7:08 am

Recommendation map for a completely stock 2008 Civic Si?

Post by SSJ_sedan »

Just bought Hondata as the first mod for my car, planning to do full bolt on’s in the future but decided to start with Hondata to wake the car up. Would I be fine running the stock base map on hondata? Or can anyone recommend me a map to run for now until I get future mods? Thanks a bunch.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Recommendation map for a completely stock 2008 Civic Si?

Post by Hondata »

Civic-Si-RRB-2-Tuned
Hondata
alexkas1977
Posts: 3
Joined: Mon Oct 08, 2018 10:42 am

Re: Recommendation map for a completely stock 2008 Civic Si?

Post by alexkas1977 »

Hi. Will that map work on FN2?
I am asking because Group N is even worse than the stock. Ignition timings are awfull, VTC tables are not smooth. At low engine speed car is not pulling at all. After 70mph on 6th gear acceleration is weak. Fine tunning fuel maps - did almost nothing.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Recommendation map for a completely stock 2008 Civic Si?

Post by Spunkster »

No that calibration will not work with your ECU. You must use the FN2 calibrations.
alexkas1977
Posts: 3
Joined: Mon Oct 08, 2018 10:42 am

Re: Recommendation map for a completely stock 2008 Civic Si?

Post by alexkas1977 »

Copying maps from it? Ignition fuel VTC?
Post Reply