Page 1 of 1
Recommendation map for a completely stock 2008 Civic Si?
Posted: Sat May 04, 2019 7:15 am
by SSJ_sedan
Just bought Hondata as the first mod for my car, planning to do full bolt on’s in the future but decided to start with Hondata to wake the car up. Would I be fine running the stock base map on hondata? Or can anyone recommend me a map to run for now until I get future mods? Thanks a bunch.
Re: Recommendation map for a completely stock 2008 Civic Si?
Posted: Sat May 04, 2019 6:56 pm
by Hondata
Civic-Si-RRB-2-Tuned
Re: Recommendation map for a completely stock 2008 Civic Si?
Posted: Tue Sep 03, 2019 12:26 am
by alexkas1977
Hi. Will that map work on FN2?
I am asking because Group N is even worse than the stock. Ignition timings are awfull, VTC tables are not smooth. At low engine speed car is not pulling at all. After 70mph on 6th gear acceleration is weak. Fine tunning fuel maps - did almost nothing.
Re: Recommendation map for a completely stock 2008 Civic Si?
Posted: Tue Sep 03, 2019 9:17 am
by Spunkster
No that calibration will not work with your ECU. You must use the FN2 calibrations.
Re: Recommendation map for a completely stock 2008 Civic Si?
Posted: Tue Sep 03, 2019 2:17 pm
by alexkas1977
Copying maps from it? Ignition fuel VTC?