Calibration for 2014 Civic Si with k&n Sri and Skunk2 megapower RR cat back, stock dp/header

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
pattamander
Posts: 2
Joined: Sat Sep 07, 2019 10:33 am

Calibration for 2014 Civic Si with k&n Sri and Skunk2 megapower RR cat back, stock dp/header

Post by pattamander » Sat Sep 07, 2019 10:38 am

Can anyone give me advice on what calibration to use for a 2014 Civic Si that already has the above-mentioned mods?

EFICU
Posts: 65
Joined: Mon Feb 25, 2019 10:14 pm

Re: Calibration for 2014 Civic Si with k&n Sri and Skunk2 megapower RR cat back, stock dp/header

Post by EFICU » Wed Sep 11, 2019 6:42 pm

Are you looking for help with tuning the car or do you just want a basemap that's close?

Let me know.

pattamander
Posts: 2
Joined: Sat Sep 07, 2019 10:33 am

Re: Calibration for 2014 Civic Si with k&n Sri and Skunk2 megapower RR cat back, stock dp/header

Post by pattamander » Wed Sep 11, 2019 6:45 pm

Just looking for the closest basemap possible for now, until I have the time and money for a Dyno Tune lol. Thanks for the response!

EFICU
Posts: 65
Joined: Mon Feb 25, 2019 10:14 pm

Re: Calibration for 2014 Civic Si with k&n Sri and Skunk2 megapower RR cat back, stock dp/header

Post by EFICU » Wed Sep 11, 2019 7:16 pm

Haha, I don't charge to help you guys out on here. I have tuned a few 9th gens with similar mods. I wouldn't recommend just throwing a file in and not following it up with some adjustments. Every car is different, fueling and ignition can be off by a bit. I don't mind helping you dial it in until you can get it dyno tuned if you want.

Let me know if you want some help.

Post Reply