2016 Civic 1.5T Non-SI +3 PSI high octane

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
arnoldod
Posts: 80
Joined: Thu Dec 26, 2019 5:25 pm

2016 Civic 1.5T Non-SI +3 PSI high octane

Post by arnoldod »

We have +6 PSI basemap high octane calibration. I understand there is no lower octane calibration for the +6 PSI as the additional boost is higher than stock.

In contrast, +3 PSI calibration has no high octane option.

Could we have +3 PSI calibration in the next update of the firmware?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2016 Civic 1.5T Non-SI +3 PSI high octane

Post by Hondata »

If you use higher octane fuel on the +3 psi the ECU will adjust the knock control down automatically.
Hondata
arnoldod
Posts: 80
Joined: Thu Dec 26, 2019 5:25 pm

Re: 2016 Civic 1.5T Non-SI +3 PSI high octane

Post by arnoldod »

Hondata wrote: Sun May 31, 2020 7:30 am If you use higher octane fuel on the +3 psi the ECU will adjust the knock control down automatically.
Thank you for the explanation.
Post Reply