I was wondering if there is any calibrations I can use besides the stock tuned basemap, I daily my car about 40 minutes a day from work and I don't wanna blow up anything on the way or hurt my motor while at it.... I know it's best for me to get a tune but our peak season is here and there is a lot of over time so I really don't have the time to drive to the nearest tuner which is 1hr half from me
Skunk2 70mm Exhaust & Takeda Stage 2
Skunk2 70mm Exhaust, Takeda Intake
- CalibratEd
- Posts: 1430
- Joined: Fri Feb 07, 2020 3:20 pm
Re: Skunk2 70mm Exhaust, Takeda Intake
Post the calibration you are currently running and a datalog of normal driving. I can look it over to see how the car is running.
-Ed
-Ed
Re: Skunk2 70mm Exhaust, Takeda Intake
Sorry it took so long waited until I drove to work
Just using the all stock tuned, the one that hondata provides
Just using the all stock tuned, the one that hondata provides
- Attachments
-
- 7282021.fpdl
- (6.42 MiB) Downloaded 48 times
- CalibratEd
- Posts: 1430
- Joined: Fri Feb 07, 2020 3:20 pm
Re: Skunk2 70mm Exhaust, Takeda Intake
Please post the calibration file you are running. You have not provided information on what vehicle you have so I would not like to assume what calibration file you are using.
-Ed
-Ed