ok quick question on the fuel trim tables...
i running on the skunk2 (cai,header,exhaust) MAP n well, i been adjusting my a/f ratio which is fine but from wut i learnd to believe from hondata is that the lines on the graph should be smooth not a jagged... soo is that a problem to have it jagged or wut? my a/f ratio is stayin n the mid 13's soo yeah also my mpg is really really shitty like maybe 20mpg or something around that which is bad. also my fuel gauge goes down really really quick! which ive noticed everyone has that problem after they reflash the ecu... i just want good mpg again!
any help would be great!
also wut would be the outcome if i decided to retard or advance the timing say 2 degrees all thurout the rev range?
ohh btw no knocks after i kinda played with the fuel trims n b4 i did it was maybe like 2 or 3 only on cyl. 2
Fuel Trims And Street Tuning
-
- Posts: 16
- Joined: Mon Sep 04, 2006 5:05 pm
- Location: Grand Island Nebraska
- Contact:
Fuel Trims And Street Tuning
The Power Of Dreams
-
- Posts: 16
- Joined: Mon Sep 04, 2006 5:05 pm
- Location: Grand Island Nebraska
- Contact:
-
- Posts: 16
- Joined: Mon Sep 04, 2006 5:05 pm
- Location: Grand Island Nebraska
- Contact:
ok serial number not sure i dont have my flashpro close to me at the time
as for the version i am using it is 1.1.0.8
datalog, n cal, uploaded
my car is a 06 civic si
the ecu not sure what the number is but i know it fits wilthin the list of ecu i can use with the flashpro
mods are injen cai, buddy club header, skunk2 60mm catback
as for the the problem please read the 1st post
now that i listed all this can someone please help
also btw i am having the clod start issue. i have changed the starting trims like bumping it up every 5% but nothing really seems to help kinda want to get this fix before it gets cold here nebraska... in its like only 65 here now n the problem is kinda bad cant wait to c when it gets like 10 degrees
as for the version i am using it is 1.1.0.8
datalog, n cal, uploaded
my car is a 06 civic si
the ecu not sure what the number is but i know it fits wilthin the list of ecu i can use with the flashpro
mods are injen cai, buddy club header, skunk2 60mm catback
as for the the problem please read the 1st post
now that i listed all this can someone please help
also btw i am having the clod start issue. i have changed the starting trims like bumping it up every 5% but nothing really seems to help kinda want to get this fix before it gets cold here nebraska... in its like only 65 here now n the problem is kinda bad cant wait to c when it gets like 10 degrees
- Attachments
-
- Skunk2 Reflash After Data 9-16-09.fpcal
- cal.
- (74.21 KiB) Downloaded 217 times
-
- Skunk2 Run 9-15-09.fpdl
- datalog
- (732.87 KiB) Downloaded 234 times
The Power Of Dreams
-
- Posts: 16
- Joined: Mon Sep 04, 2006 5:05 pm
- Location: Grand Island Nebraska
- Contact:
-
- Posts: 16
- Joined: Mon Sep 04, 2006 5:05 pm
- Location: Grand Island Nebraska
- Contact:
Instant gratification expectation. You need to tune your fuel for part throttle. See http://www.hondata.com/help/flashpro/tu ... e_fuel.htm
Hondata