Long time FP user, first such problem.
Tracing various error codes with the VSA system using another scanner, now have a check engine light that I wanted to study but FP cannot talk with ECU - only the power and datalog LEDs blink together on the box about once per second.
Suggestions?
Flashpro power/datalog LEDs blink but no ECU connection
Re: Flashpro power/datalog LEDs blink but no ECU connection
What is the Flash Pro serial number? From Help, About, what is the version of software you are using?
Re: Flashpro power/datalog LEDs blink but no ECU connection
FP-SI-US-11430
v. 1.8.3.0
I don't think its a FP problem, more likely an ECU problem but wondering what the flashing LEDs are trying to tell me.
Thanks for the quick response!
v. 1.8.3.0
I don't think its a FP problem, more likely an ECU problem but wondering what the flashing LEDs are trying to tell me.
Thanks for the quick response!
Re: Flashpro power/datalog LEDs blink but no ECU connection
The FlashPro is not communicating with the ECU. Unplug the FlashPro, disconnect the battery for a minute, and then see if the FlashPro can see the ECU. Don't forget about the radio code.
Hondata
Re: Flashpro power/datalog LEDs blink but no ECU connection
Nope, didn't help, but a decent idea thanks. So ran a self diagnostic and got Error 1 which is the FCAN system. Explains why FP can't talk to the ECU.
I'm deep into troubleshooting hell now! That system has 60+ steps to walk through to isolate the cause. Wish me luck...
I'm deep into troubleshooting hell now! That system has 60+ steps to walk through to isolate the cause. Wish me luck...
Re: Flashpro power/datalog LEDs blink but no ECU connection
Update your software to the v1.9.1 .
Re: Flashpro power/datalog LEDs blink but no ECU connection
I am having the same problem. Just updated both the Manager and the Flashpro today. (S2000, 2006 VSA)
Re: Flashpro power/datalog LEDs blink but no ECU connection
As this was from 2014, please start your own thread and include all pertinent details.