FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
10 posts • Page 1 of 1
I have samsung Galaxy s8 plus and it would connect via bluetooth before and now it doesn't do it anymore. I've tried to reset my phone, unplug flashpro and plug it back in, and nothing seems to work for it. Also my phone did update recently. Any suggestions?
Plug the FlashPro in to a laptop , open the FlashPro Manager software and go to the FlashPro button at the top then click the Bluetooth tab and change the pin number to something you will remember, then try to pair with your phone in the android settings. After it pairs, then open the Hondata app and it should allow you to connect.
Hondata app, I've tried to use the app alone on the Samsung Note 8 and it says connection failed. Then I tried connecting through the app on the head unit and it also says connection failed. I have the most current version of the app and I downloaded the most recent Flashpro manager. I also checked the 2018 civic head unit box.
- Screenshot (5).png (32.11 KiB) Viewed 2518 times
You must uncheck the alternate pairing mode if you want to connect to your phone. After making this change you will have to unplug the FlashPro completely form the USB and the vehicle to restart it.
Ok I did that and it still says connection failed. So I tried starting fresh. I unpaired my flashpro from the computer and tried to reconnect through bluetooth and it wouldn't pair. I unplugged the USB and then reconnected. Tried pairing to the flashpro again and it paired. opened the hondata app on the phone and its now connected! So I just tried connecting to the FP with bluetooth on the headunit and it kept saying couldn't connect. I changed the bluetooth password to 0000 and re-checked the 2016+ civic box, then unplugged the ECU and USB. Tried connecting headunit bluetooth to FP and it failed. I then reconnected the USB and ECU and it connected to the headunit bluetooth. I then tried to connect to the headunit app to the FP and it said connection failed. I unplugged the USB and left the ECU plugged in and it connected! running great on V1.5! Do I have to leave the FP plugged into something for the headunit to read the FP?