Car started w/o coolant added coolant now no start. Help!

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Post Reply
9k_Dre
Posts: 14
Joined: Fri Jul 13, 2018 1:07 pm

Car started w/o coolant added coolant now no start. Help!

Post by 9k_Dre »

Hey Hondata,

I recently finished my turbo build.
Precision 6262
DW 1000cc injectors
Aeromotive FPR
Stock motor
KMOD turbo manifold and downpipe.
-6an fuel return
Currently open downpipe

I put everything together and went to start her up w/o coolant. The car started up no issues and idled fine. I let the car idle for about 1 minute before shutting her off. The following day I filler her up with coolant and went to bleed the system, the car cranks but refuses to turn over. I am getting fuel pressure (60 psi at the rail). I checked my plugs and I have spark, and timing marks line up perfectly. Car ran and idled fine yesterday what could the issue be?

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car started w/o coolant added coolant now no start. Help!

Post by Spunkster »

Is it actually spraying fuel?

9k_Dre
Posts: 14
Joined: Fri Jul 13, 2018 1:07 pm

Re: Car started w/o coolant added coolant now no start. Help!

Post by 9k_Dre »

Yes, the injectors are spraying.

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car started w/o coolant added coolant now no start. Help!

Post by Spunkster »

check all wiring and fuses. Also try datalogging while trying to start and see if there is anything obvious in the datalog.

9k_Dre
Posts: 14
Joined: Fri Jul 13, 2018 1:07 pm

Re: Car started w/o coolant added coolant now no start. Help!

Post by 9k_Dre »

I checked every last fuse and wiring. I'll datalog it while cranking and post to see if there is anything strange going on.

9k_Dre
Posts: 14
Joined: Fri Jul 13, 2018 1:07 pm

Re: Car started w/o coolant added coolant now no start. Help!

Post by 9k_Dre »

Can you take a look at my datalog and calibration to help me figure out what it might be? I will post them tonight when I get home from work.

Thank you.

Post Reply