Tried reducing timing and adding fuel. Tried starting over. Tried stock basemap and tuned basemap same thing. Looked for loose stuff and no avail. I’ve looked through map for inconsistencies and only thing I can tell is it happens after string at light or etc. I can’t find it. Any help would be appreciated.
Kn intake
DNA headers to exhaust no cat etc to greddy muffler.
91 octane
Arizona
Pull spark plugs after 2 weeks and there burnt a little.
Flash pro manager tells me I’m rich but spark plugs say otherwise.
Knocks only in cylinder #3. Attached fpcal and data logs
-
- Posts: 2
- Joined: Wed Feb 28, 2018 12:31 pm
Knocks only in cylinder #3. Attached fpcal and data logs
- Attachments
-
- A7354F64-A241-4BED-BFA9-F244863A10B7.jpeg (3.56 MiB) Viewed 2782 times
-
- datalog0012.fpdl
- (858.06 KiB) Downloaded 128 times
-
- datalog0011.fpdl
- (209.5 KiB) Downloaded 135 times
-
- datalog0010.fpdl
- (589.38 KiB) Downloaded 134 times
-
- shaneeminenow.fpcal
- (19.58 KiB) Downloaded 136 times
Re: Knocks only in cylinder #3. Attached fpcal and data logs
Probably the headers causing the knock reading. You need to tune the fuel as it is perhaps 7% rich. I think the wideband lambda is somewhat more accurate than reading plugs...
Hondata
-
- Posts: 2
- Joined: Wed Feb 28, 2018 12:31 pm
Re: Knocks only in cylinder #3. Attached fpcal and data logs
Will do. Have adjusted fuel and car felt really good but knock count didn’t change in cylinder 3. Did try to pull timing in cylinder trim #3. It then spread to #1 and sometimes #4. But will do and post catalog when I get home.
-
- Posts: 30
- Joined: Fri Aug 05, 2011 1:54 pm
Re: Knocks only in cylinder #3. Attached fpcal and data logs
Try adjusting spark plugs gap. NGK comes with 1.1 gap from factory, but 0.8 works better (Denso spark plugs have 0.8 from factory if Im not wrong).