Page 1 of 1
k20z3 Help losing power..
Posted: Wed Jul 10, 2019 3:51 pm
by Douglas47k
so i intalled a ktuned short ram intake and the car felt like hesitating and it felt it was loosing power. i drove the car for about a week and then the hondata arrived and it still felt the same. Of course the car feels faster but i am still feeling the car loses power when i press gas....(HELP)
Re: k20z3 Help losing power..
Posted: Wed Jul 10, 2019 4:01 pm
by Hondata
Moved from the KPro section.
Your long term fuel trim is 15% and in the datalog you start to run very lean when you come off the throttle. So the fuel tuning is way off. Are you running mass flow or speed density? Post the calibration.
Re: k20z3 Help losing power..
Posted: Wed Jul 10, 2019 6:57 pm
by Douglas47k
i am running mass flow and the calibration i am using is K&N V2 SRI. THANK YOU
Re: k20z3 Help losing power..
Posted: Thu Jul 11, 2019 9:16 am
by Hondata
The intake is leaning things out 25-30%. This is very high so have a look at the intake and make sure everything is aligned correctly. Otherwise it needs tuning.