07 civic si 3.5 CAI needs help

[Woogie18]

made this datalogs today.. i pulled in 3rd gear foot in the metal, i'm very impressed on how it performed i was thinking of doing another pull but i ended up running out of real estate..lol i am doing it again tomorrow i will keep u posted

[Woogie18]

2nd datalog file too big to be attach..i will redo it again

[EFICU]

Okay sounds good. The datalog you provided looks really good! I don't see any changes that need to be made. So when we see the datalog with a WOT pull in third gear, we'll go from there. Glad to see that one was dead on for part throttle driving.

[Woogie18]

ok here is the datalog WOT 3rd gear pull..i think i nailed this time..only i missed 4th gear after the pull loll..it was good let me know what you think

[EFICU]

Looks pretty good. The WOT fueling was a little on the lean side, so I made some changes there. Take this one for another drive, and be sure to get a clean third gear WOT pull just like that one there so I can see the WOT fueling. We might be there on this one.

Woogie18.SD.Rev06 (Blended).fpcal

(22.8 KiB) Downloaded 73 times

[Woogie18]

ok here is the datalog for rev 6 file..let me know what u think

[EFICU]

That one looked really good. Needed a little touch-up on the WOT fueling, and one knock you had. We should be there on this one though. Take it for a spin, same type of driving and WOT pull like you've been doing.

Woogie18.SD.Rev07 (Blended).fpcal

(22.87 KiB) Downloaded 66 times

[Woogie18]

here is the datalog for rev7 file. let me know what you think

[EFICU]

Looks really good. Had one knock again in the same spot, so I massaged that area a bit. Take this one for another drive when you can, we should be there on this one but we will see.

Woogie18.SD.Rev08 (Blended).fpcal

(22.88 KiB) Downloaded 79 times

[Woogie18]

did the samething let me know what u think rev 8 datalog file

[EFICU]

Looks really good man. I would say you're good to go now. It's been consistent over quite a few files, and it is knock free now. Have fun with it, if you add any mods in the future let me know and we can make adjustment for those.

[Woogie18]

thank you very much for all your help i really appreciated very much. Yes definitely if i ever add any mods to it, you're the first one will know..Honestly speaking the way how the car performs and responses today is much better than before. thanks again

[EFICU]

thank you very much for all your help i really appreciated very much. Yes definitely if i ever add any mods to it, you're the first one will know..Honestly speaking the way how the car performs and responses today is much better than before. thanks again

Sounds good, glad you’re happy. Yeah if you ever add a race header or exhaust, or both, it will really wake up. Luckily you have a good intake, so it runs pretty good for just an intake.

Have fun with it!

[Woogie18]

Hey quick question i am planning on getting headers and exhaust around how many hp gains will i be getting??

[EFICU]

There is no way to say for certain. Generally, IHE cars make between 210-220 depending on the tune and fuel used. Will it be a substantial difference, yes, it will feel like an entirely different car. If you just throw on the header and exhaust and retune it for those mods, you won't notice much of a difference. With those mods, there needs to be some changes to the cam angle mapping to take full advantage of them.

I have a few Virtual Dyno charts from before and after on cars, stock to FBO. Here is an idea of the HP difference.

Luther Comparison Final.jpg (109.14 KiB) Viewed 747 times