Hondata

When I flash my ride with the SI map, my CEL light flashes 5 times after the 15 secs of "diagnostics". If I use the Type R reflash map, no flashing, it just goes off after the "diagnostics".

Any advise?

It is showing the readiness codes status.

ModFreak wrote:When I flash my ride with the SI map, my CEL light flashes 5 times after the 15 secs of "diagnostics". If I use the Type R reflash map, no flashing, it just goes off after the "diagnostics".

Any advise?

Whch Si Map did you use?

engjoo wrote:

ModFreak wrote:When I flash my ride with the SI map, my CEL light flashes 5 times after the 15 secs of "diagnostics". If I use the Type R reflash map, no flashing, it just goes off after the "diagnostics".

Any advise?

Whch Si Map did you use?

I'm using the Civic-SI-Race-1 map with 310 injectors.

Hondata wrote:It is showing the readiness codes status.

I still don't get it. Why on a Reflash map no blinking when ready but on the SI map there is. Are the Civics in US (SI) all blinks when it is ready or is there some "diagnostics" error that cannot be understood in the error code of our ECU?

ModFreak wrote:

engjoo wrote:

ModFreak wrote:When I flash my ride with the SI map, my CEL light flashes 5 times after the 15 secs of "diagnostics". If I use the Type R reflash map, no flashing, it just goes off after the "diagnostics".

Any advise?

Whch Si Map did you use?

I'm using the Civic-SI-Race-1 map with 310 injectors.

Does it work better for the car?

engjoo wrote:

ModFreak wrote:

engjoo wrote: Whch Si Map did you use?

I'm using the Civic-SI-Race-1 map with 310 injectors.

Does it work better for the car?

Nope, don't seemed to function stably on our ride.

The calibrations are made for different markets - the JDM market, which does not require a readiness code test, and the US market, which does.