Page 1 of 1

ECT and IAT compensation in ignition tables

Posted: Sun Sep 18, 2011 7:25 pm
by ModFreak
Hi Hondata,

Possible to include this in the ignition calibration for Civic-SI-RRC files?

Thanks

Re: ECT and IAT compensation in ignition tables

Posted: Mon Sep 19, 2011 10:06 am
by Spunkster
They are already there, make sure you go to Options and click on show advanced parameters.

Re: ECT and IAT compensation in ignition tables

Posted: Tue Sep 20, 2011 7:44 am
by engjoo
Spunkster wrote:They are already there, make sure you go to Options and click on show advanced parameters.

No it is not there despite activating advanced parameters.

I have asked this before and my question has gone unanswered.

http://www.hondata.com/forum/viewtopic.php?f=27&t=12436

Re: ECT and IAT compensation in ignition tables

Posted: Tue Sep 20, 2011 9:11 am
by Hondata
Why not use the race calibration?

Re: ECT and IAT compensation in ignition tables

Posted: Tue Sep 20, 2011 9:41 am
by engjoo
Hondata wrote:Why not use the race calibration?
Can hondata produce race calibration that is equivalent to the FD2 reflash for us?

I was thinking of porting over to the race calibration but the there are mismatch in the column count of the tables.

Re: ECT and IAT compensation in ignition tables

Posted: Sat Sep 24, 2011 7:16 pm
by ModFreak
Hondata wrote:Why not use the race calibration?
Seemed the race calibration uses the USA Civic SI ECU which is not really compatible with ours. I have noticed certain parameters does not work.