Flashpro download map

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
hyrpm1
Posts: 2
Joined: Sun May 09, 2021 3:40 pm

Flashpro download map

Post by hyrpm1 »

Hi
I bought a fn2r with hondata already been tuned for the mods by remote tuner in Africa

I am going to swap all the mods to another fn2r and wanted to swap over the flashpro
But stupid me as I have never used the hondata software before and accidentally pushed read protect on the laptop

So I had to delete both maps in order for it to unlock
Is there anyway of downloading the map from the cars ecu or reading it as it's still flashed in there ?

If not anyone willing to give me a basemap to suit so I can limp it to my local tuner in Australia
My mods are
Stock injectors
RBC inlet
Jtune headers
200cell cat
2.5 inch axle back
Skunk 2 cams
Skunk 2 long ram CAI which I think would throw off the maf curve
Thank you very much for any advice
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Flashpro download map

Post by Spunkster »

No, you cannot read the file from the ECU. You will have to open open a file you have saved on the laptop/email, or start with a new calibration.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Flashpro download map

Post by EFICU »

If you need help getting a basemap to drive on to the dyno let me know. We can tune it on the 0* cam angle so you can drive it without worries to the dyno. It might take a revision or two to get it good, but it's no problem. Just let me know.
Post Reply