What are K20Z4 Stock camshafts specs?

FlashPro questions & answers specific to the FN2 European Civic Type R
Locked
walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

What are K20Z4 Stock camshafts specs?

Post by walter » Sat Oct 17, 2009 4:22 am

What are K20Z4 Stock camshafts specs?

Intake big lobe;
Intake small lobe;
Exhaust big lobe;
Exhaust small lobe;

Thanks
FN2 R-04455

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr » Sat Oct 17, 2009 8:49 am

i don't know but they are the same as the USA civic SI.

So probably is better to as ask in the SI forum what is the honda civic SI cams specs because they know.

mw1978
Posts: 32
Joined: Tue Dec 30, 2008 11:06 am

Post by mw1978 » Sat Oct 17, 2009 1:09 pm

NUNO maybe spec is the same but part numbers are difrent!

walter
Posts: 27
Joined: Thu Mar 26, 2009 5:32 am
Location: Lihuania

Post by walter » Sun Oct 18, 2009 2:31 am

mw1978 wrote:NUNO maybe spec is the same but part numbers are difrent!
Yes, You are right, part numbers are different.

Here are stock SI cams (info from http://www.8thcivic.com/forums/cams-int ... input.html)

stock 06 Civic Si cams are
intake big lobe
256 @ .050 - .475" lift

intake small lobe
194 @ .050 - .270" lift
200 @ .050 - .277" lift

exhaust big lobe
246 @ .050 - .424 lift

Exhaust small lobe
184 @ .050 - .260" lift
202 @ .050 - .266" lift

the 09 Civic Si cams are
intake big lobe
252 @ .050 - .483" lift

intake small lobe
190 @ .050 - 289" lift
I forgot to do the other lobe (I will get it done this week)

exhaust big lobe
247 @ .050 - .431" lift

exhaust small lobe
195 @ .050 - .285" lift
same as the intake, I forgot.



But I think K20Z4 has different camshafts than K20Z3...
FN2 R-04455

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr » Sun Oct 18, 2009 7:08 am

the FN2 are the

14110-RSP-G00 (intake)
14120-RSP-G00 (exhaust)

I have compare this to the SI 2006 cams in a honda print and the are the same.

Yes probably the same specs and diferent part numbers.

Locked