RC 440cc Injectors

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

RC 440cc Injectors

Post by _Mozz_ »

Hi,

Might need to change my injectores soon. Was thinking of RC 440cc.

What needs to be changed on the FlashPro calibration?

Regards

User avatar
Spunkster
Site Admin
Posts: 18791
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

You need to change the injector size in the calibration window under Fuel, and then tune it properly to get the correct AF ratio.

_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Post by _Mozz_ »

Is that it??

I was under the impression something else had to be done!?

Regards

_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Post by _Mozz_ »

What about the Injector opening times??

User avatar
Spunkster
Site Admin
Posts: 18791
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

If you have the injector dead time information that would also be the time to put that in.

_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Post by _Mozz_ »

Hi,

I was looking on your Calibrations.

Noticed that the Civic SI (witch has same injectors as me), Stock equivalent Calibration has the same Injector Opening time as the FN2 Stock equivalent Cal.

So, i see that there is a Civic SI Starting Calibration for 440cc injectors, so, could i use those Injector Opening Times on mine??

Thanks

Paulo

_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Post by _Mozz_ »

Hondata?? Any thoughts??

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr »

there is a MAP 440 cc injectors starting calibration for the fn2 on flash pro.

_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Post by _Mozz_ »

Its for the Civic Si (FG2/FA5).

And thats what i am asking, could that be used on our FN2??

Also, i would like a MAP cal.

Regards

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Post by nunoctr »

it's for both cars.

_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Post by _Mozz_ »

:D

Thanks

All i need now is a IPS K2 Calibration to start playing...!!

Regards

Paulo

dinoc
Posts: 113
Joined: Wed May 16, 2007 4:35 am

Post by dinoc »

Are there any MAF calibration for this 440/410 injectors ?
Euro Honda Accord CL9

mw1978
Posts: 32
Joined: Tue Dec 30, 2008 11:06 am

Post by mw1978 »

dinoc wrote:Are there any AFM calibration for this 440/410 injectors ?
NOOOOOOOO!!!! Only for MAP

Post Reply