Jackson Racing for FN2 kit with FlashPro Problem!

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
npart
Posts: 3
Joined: Wed Jul 13, 2005 11:34 pm
Location: Athens
Contact:

Jackson Racing for FN2 kit with FlashPro Problem!

Post by npart » Thu Mar 04, 2010 8:45 am

After installing a Jackson Racing kit for a European Honda Civic FN2 Type-R, it was time to install the Flash Pro!
After registration+ecu lock and after uploading the file , turning the key, every light in the control was on, and the car did not start or respond.
the flash pro manager at the bottom left corner shows all the 'on' conditions.
the flash pro was on, the key was on, but the ecu was off!
can someone explain that? what is the problem? now i cannoti communicate with the ecu... no longer with the honda obd2 tool!

for your information, i have uploaded the reflash program.!

User avatar
Hondata
Site Admin
Posts: 8758
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Thu Mar 04, 2010 9:49 am

Use the 'Send Support Information To Hondata' function.

Has your ECU been previously reflashed?
Hondata

npart
Posts: 3
Joined: Wed Jul 13, 2005 11:34 pm
Location: Athens
Contact:

Post by npart » Thu Mar 04, 2010 11:46 am

I will proceed with sending information from 'help'
the customer does not know if his ecu where previously reflashed by hondata or by other person...

Post Reply