Page 1 of 1

Jackson Racing for FN2 kit with FlashPro Problem!

Posted: Thu Mar 04, 2010 8:45 am
by npart
After installing a Jackson Racing kit for a European Honda Civic FN2 Type-R, it was time to install the Flash Pro!
After registration+ecu lock and after uploading the file , turning the key, every light in the control was on, and the car did not start or respond.
the flash pro manager at the bottom left corner shows all the 'on' conditions.
the flash pro was on, the key was on, but the ecu was off!
can someone explain that? what is the problem? now i cannoti communicate with the ecu... no longer with the honda obd2 tool!

for your information, i have uploaded the reflash program.!

Posted: Thu Mar 04, 2010 9:49 am
by Hondata
Use the 'Send Support Information To Hondata' function.

Has your ECU been previously reflashed?

Posted: Thu Mar 04, 2010 11:46 am
by npart
I will proceed with sending information from 'help'
the customer does not know if his ecu where previously reflashed by hondata or by other person...